You are here
The Bednorz-Seal is especially suited to securing curtain side trucks fitted with TIR cables, box trucks, railway wagons, lorry tankers and containers, as well as boxes and other items for despatch.
Connected with the Bednorz-Extension, it is most versatilely applicable, as the Bednorz-Extension can be cut to any length and connect sealing nozzles which are far apart from each other; in addition, the Bednorz-Extension with its much smaller width and thickness can serve as an ‘adaptor’ to connect sealing nozzles too small to fit the Bednorz-Seal.
The Bednorz-Seal is made of zinc-plated sheet metal. The main body is produced out of one piece making it impossible to disassemble and then reassemble the seal again.
Bend the top of the strap downwards and position the pin in the oval slot. Fold the seal at the point where it is marked with "> <". Press both parts of the seal head together, until there is an audible click. The seal's integrity can be checked by moving the seal strap of the locked seal. It is not possible to enter the lock with any kind of tool. The manual opening of the seal is impossible without leaving marks (see How to apply and check the Bednorz-Seal).
The raised edges provide additional protection against manipulation once the seal is locked.
The Bednorz-Seal is embossed with a letter and a 7-digit serial number and can be customised with an additional text of up to 17 characters (incl. blanks).
A tin snip is required to remove the Bednorz-Seal.